4-Pack · 1-inch sheave opening
PP10 V2
The compact V2 pulley with a 1-inch sheave opening for tight turns and smaller cable bundles. Load or remove cable midspan — no threading an end through.
- Midspan cable loading
- Fully shrouded sheave
- Designed & Tested for 300 LB Loads
- Patent Pending
- Assembled in Colorado, USA
What’s in the box
- 4 PP10 V2 pulleys
- 4 chains
- 8 spring clips (attachment + cinch)
- 4 retainer magnets
Fit & dimensions
PP10 V2 specifications
Choose by sheave opening — not a fixed cable count. PP10 and PP20 share approximately the same sheave radius.
- Sheave opening (W × H)
- 1.00 × 1.25 in
- Overall height
- 4.75 in
- Side profile width
- 2.875 in
- Front outside width
- 2.00 in
- Cable loading
- Midspan — no end threading
- Designed & Tested for
- 300 LB Loads
- Carries the load
- Included chain
- Clips per pulley
- 2 (attachment + cinch)
- Wood attachment
- Cinch clip — no magnet
- Retainer magnet (steel)
- Holds chain position when tension is released
- Assembly
- Colorado, USA
- Amazon SKU
- PP10-V2-4PK
How to set it up
- Attach. Clip the chain to the pulley with the attachment clip.
- Wood: wrap the chain around the framing and secure it with the cinch clip. No magnet is used on wood.
- Steel: the chain carries the load. Add the retainer magnet to hold the chain in position when tension is released.
- Load midspan. Load or remove cables at any point along the run — no threading an end through the pulley.
- Pull. The shrouded housing keeps cable on the sheave through stops and restarts.
